聚碳酸酯PC板加工功用好，為習氣不一樣作業的運用，可對PC板二次加工，首要包含：PC板切開、PC板折彎、PC板雕琢、PC板打孔、PC板粘接等。咱們對PC板進行二次加工時有必要要對pc板的功用有最完善的了解

Polycarbonate (PC) plate can be processing function is good, for the use of habits in different operations, can be carried out on the PC board secondary processing, primary contains: cut PC board, PC board bending, PC board carve punch, PC board, PC board adhesive, etc. Let's secondary processing on the PC board is necessary to have the most perfect knowledge of the function of the PC board

PC板（首要可分為陽光板和耐力板），都是可以用標準的木材或金屬加工設備進行切開的，選用為PVC扣板塑料板分外計劃的鋸片具有非常好的效果。一般的圓鋸，帶鋸和手鋸等都可以運用，還可以用便攜式電鋸，留神裁剪板材的是要要慢，防止弄壞板材。

PC board (the first can be divided into the sunshine board and endurance plate), can be used for open the standard wood or metal processing equipment, choose for PVC gusset plate plastic board is plan of the saw blade has very good effect. General circular saw, band saw and handsaw etc all can use, also can use portable chainsaw, careful cutting plate is slower, prevent the broken plate.

厚度較薄的陽光板可以用短而尖銳的刀片進行切開。也可以用一種特制手動縱向拉索切開東西。任何情況下都要留神在切開處附近進行支撐，防止哆嗦，并把切開時發生的粉塵和碎宵根除，堅持板材潔凈。

Sunshine with thin thickness plate can be cut with short and sharp blade. You can also use a special manual longitudinal incision lasso. Any circumstances be careful cut in place near support, prevent shivering, and through the dust and broken when night eradicated, adhere to the plate clean.

陽光板和耐力板可耐受多種化學品的腐蝕，對于此外的一組化學品，它的耐受才調有限，還有一組化學品會對板材構成損壞。損壞程度依賴于腐蝕的嚴重性以及顯露 的時間。建議選用氯丁橡膠（cr）三元乙丙膠條（EPDM）和中性硅膠等進行密封。如選用其他資料，PC板則應考慮與陽光板和耐力板的化學相容性。此外，該資料 的線膨脹和耐老化功用也要與陽光板和耐力板相比較。

Sun plate and endurance can tolerate a variety of chemical corrosion, for a group of chemicals, in addition to adjust its tolerance is limited, there is a group of chemicals will be on board damaged. The seriousness of the damage depends on the corrosion and show time. Chloroprene rubber (cr) is a suggested alternative EPDM gaskets (EPDM) and neutral silicone seal etc. If choose other materials, should consider to chemical compatibility and sunshine board and endurance board. In addition, the data of linear expansion and ageing resistance function is compared with the sun plate and endurance.